A lovely rich amber burst over slame/quilt with some MONTY's Retrowind pickups for the a harder hitting late 50s Les Paul tone.
Very similar to the Derrig /Slash inspired Lion we built a few years ago.
The particular colouring of the maple cap takes an amber stain so well
BODY
African mahogany body - some light chambering
Fine Quilted/striped Maple cap
Thinner than a Gibson LP Custom but not super skinny
Delicate 2 tone sunburst finish with Ivoroid binding
All access neck joint
NECK
South American mahogany 3 piece quartersawn neck
Width: 43mm at nut - 57mm at last fret
Depth: 22mm at 1st fret - 25mm at 12th fret
Neck shape: slim-med C shape profile
Radius : 12"
Rosewood fingerboard with ivoroid binding
Dunlop 6000 fretwire
Mother of pearl block markers on front and black tahiti pearl side markers
Earvana compensated tuning nut
HARDWARE
Chrome hardware
Tuners: Graphtech Ratio Tuners
Strap Buttons: Jim Dunlop straplocks
Bridge: TonePros locking Bridge & TonePros locking tailpiece studs
Lightweight aluminium tailpiece
Anomaly Pickup mounting ring
ELECTRONICS
Pickups: Monty'sRetrowind humbucker set
Monty's Retro Wind Humbucker (formerly known as the Humdinger) is a vintage-voiced humbucker with a modern twist. Slightly hotter than a true vintage humbucker, it has a tight response in the bass, with a slight bite in the mids and lush, dynamic highs.
Screened electronics cavities
CTS 550k pots and switchcraft jack and 0.022uF 0.01uF SoZo tone capacitor
WEIGHT
7lb 13oz
Set up with 10-46 gauge strings with 1.5mm bass and 1.3mm treble side action
Feline custom moulded case by Hiscox Cases